25 radius circles TASK 8: Create the four 2.25 radius circles TASK 9: Trim the geometry TASK 10: Save the Drawing TASK 11: TASK 12: TASK 13: TASK 14: TASK 15: TASK 16: TASK 17: TASK 18: 25 radius circle TASK 7: Use mirror to create the remaining. 25 diameter circle TASK 6: Create the first. 25 diameter circles TASK 5: Create the first. MILL-LESSON-5 - THE PROCESS Geometry Creation TASK 1: Setting the environment TASK 2: Create a rectangle 3 X 3 – the centre is at X0 Y0 TASK 3: Create the pocket at the center of the part TASK 4: Create center points for the four. 0.5 diameter flat end mill to machine the pocket and contour. 0.25 diameter drill to drill all the 0.25 diameter holes through the part. 0.5 diameter spot drill to spot drill all the 0.25 diameter holes. Three cutters will be used to create this part. Mastercam Training Guide TOOL LIST Â Â Â Â Â Inspect the toolpath using Mastercam’s Verify and Backplot by: Launching the Verify function to machine the part on the screen. Â Generate a 2-dimensional milling toolpath consisting of: Drill toolpath. Â Establish Stock Setup settings: Stock size. This Lesson covers the following topics: Â Create a 2-dimensional drawing by: Creating lines. You will create the geometry for Mill-Lesson-5, and then generate a toolpath to machine the part on a CNC vertical milling machine.
0 kommentar(er)
